+46 (0)31 763 26 00 info@acosense.com

Product

Acospector

Acoustic Chemometer

ACOspector is an online instrument which uses acoustics to analyze liquids in pipes continously and in real time; without invasive installation procedures. The technology is easy to use, flexible and opens up whole new opportunities for continuous monitoring, analysis and optimization of industrial processes.

Listening

to hear the differences making a difference

ACOspector uses the technology active acoustic spectoscopy to analyse complex fluids in the process industry. To analyze the fluid, a known acoustic signal is transmitted through the pipe wall and the fluid. The signal is affected by the fluid properties, and by analyzing the recorded acoustic spectrum conclusions regarding the fluid and its properties can be drawn.

Interprets

from sound to information.

The acousic spectrum is utilized to determine the wanted fluid properties based on an earlier established model connecting acoustic properties to fluid properties. The model is unique to each application and tailored to each instrument.

Conveys

information continuous in real time.

The property of interest, analyzed in the fluid, or the prediction, is conveyed to the factory system via supplied 4-20 module or, as optional extra, Anybus.

Non-Invasive

ACOspector is non-invasive and can be installed during full operation without affecting the process.

  • Safe maintenance
  • Quick installation
  • Handles opaque and corrosive fluids

Intelligent

ACOspector is taught to capture the wanted fluid parameter and can be configured to determine multiple properties simultaneously.

  • Visualizes the process
  • Captures the variation
  • Learns the process

Real time

ACOspector operates in real time and the reporting interval to the factory is configurable down to a few seconds.

  • Save time and money by seeing the variations when they happen
  • Increase process knowledge
  • See the effect of process changes immediately

The technology

Active Acoustic Spectroscopy

The product ACOspector uses the technology active acoustic spectroscopy to analyze the process fluid. Using this indirect method, acoustic changes of the system are observed which are mathematically linked to process variables of interest.

The instrumentation – what you see by the pipe

The instrumentation consists of sensors for generation and recording of sound, and an amplification and process electronic circuit. Additionally, a data unit, connected via Ethernet, is used for control, computation intensive signal processing and prediction of the fluid property to analyze.

The sensors are attached to the outside of the pipe using heat-resistive adhesive and the signal processing unit is placed nearby. The sensors continuously send a custom acousic signal which is processed by the processing unit and relayed to the connected data unit which, after processing, presents the result to the user.

Are you interested in our product?

Download the form below, fill in the information you can and send it by email to info@acosense.se. Then we will get back to you.

Acosense optimises the processing industry by literalilly listening to it. By applying Active Acoustic Spectroscopy a new level of understanding can be reached. Not only fluid properties can be analysed but entire process sections can be understood and superviced. 

Contact

Acosense AB
Stampgatan 20A
411 01 Göteborg
Sweden
info@acosense.com
+46 (0)31 763 26 00